Seat Ventilation Heating and Cooling Module Scan Tool Information
Climate Control Seat Module
| Parameter | Expected Value | Description |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Battery Voltage | Varies | The scan tool displays volts. This is the current battery voltage at the module. |
| Seat 1 Back Temp | Varies | The scan tool displays 0-255 counts or 0-5.0 volts. The counts or voltage displayed is an input to the climate control seat module from the driver seat back temperature sensor. High scan tool values (counts or voltage) indicate a higher temperature while low values indicate a lower temperature. |
| Seat 1 Cushion Temp | Varies | The scan tool displays 0-255 counts or 0-5.0 volts. The counts or voltage displayed is an input to the climate control seat module from the driver seat cushion temperature sensor. High scan tool values (counts or voltage) indicate a higher temperature while low values indicate a lower temperature. |
| Seat 2 Back Temp | Varies | The scan tool displays 0-255 counts or 0-5.0 volts. The counts or voltage displayed is an input to the climate control seat module from the passenger seat back temperature sensor. High scan tool values (counts or voltage) indicate a higher temperature while low values indicate a lower temperature. |
| Seat 2 Cushion Temp | Varies | The scan tool displays 0-255 counts or 0-5.0 volts. The counts or voltage displayed is an input to the climate control seat module from the passenger seat cushion temperature sensor. High scan tool values (counts or voltage) indicate a higher temperature while low values indicate a lower temperature. |
Climate Control Seat Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Driver Seat Blower Cmd. | This output control is used to command the driver seat cushion and seat back blower motors On and Off. |
| Driver Seat Cool Cmd. | This output control is used to command the driver seat cool mode On and Off. |
| Driver Seat Heat Cmd. | This output control is used to command the driver seat heat mode On and Off. |
| Passenger Seat Blower Cmd. | This output control is used to command the passenger seat cushion and seat back blower motors On and Off. |
| Passenger Seat Cool Cmd. | This output control is used to command the passenger seat cool mode On and Off. |
| Passenger Seat Heat Cmd. | This output control is used to command the passenger seat heat mode On and Off. |