Windshield Pillar Garnish Molding Replacement

Fig 1: Windshield Pillar Garnish Molding

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Windshield Side Garnish Molding Cover
2	Windshield Side Garnish Screw CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
3	Windshield Garnish Molding Assembly Procedure Disconnect the electrical connector. The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield pillar garnish molding is removed.

Callout

Component Name

Windshield Side Garnish Molding Cover

Windshield Side Garnish Screw

CAUTION:

Tighten
9 N.m (80 lb in)

Windshield Garnish Molding Assembly

Procedure

Disconnect the electrical connector.
The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield pillar garnish molding is removed.