Front Bumper Impact Bar Replacement

Fig 1: Identifying Front Bumper Impact Bar

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front fascia. Refer to Front Bumper Fascia Replacement . Remove the energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .
1	Front Bumper Impact Bar Bolts (Qty: 8) CAUTION: Refer to Fastener Caution . TIP: Load bar to locating hooks on bumper beam brackets. Drive right side upper outboard bolt/screw, then drive left side upper outboard bolt/screw, then drive remaining bolt/screws in any sequence. Tighten 25 N.m (18 lb ft)
2	Front Bumper Impact Bar

Callout

Component Name

Preliminary Procedure

Remove the front fascia. Refer to Front Bumper Fascia Replacement .
Remove the energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .

Front Bumper Impact Bar Bolts (Qty: 8)

CAUTION:

Refer to Fastener Caution .

TIP: Load bar to locating hooks on bumper beam brackets. Drive right side upper outboard bolt/screw, then drive left side upper outboard bolt/screw, then drive remaining bolt/screws in any sequence.
Tighten
25 N.m (18 lb ft)

Front Bumper Impact Bar