Rear Auxiliary Turn Signal Lamp Replacement

Fig 1: Identifying Rear Auxiliary Turn Signal Lamp

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Open the rear compartment lid in order to access the rear auxiliary tail lamp assembly nuts. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
1	Rear Auxiliary Turn Signal Lamp Assembly Nut (Qty: 4) CAUTION: Refer to Fastener Caution . TIP: Check to ensure the outer tail lamp bracket is secure. Tighten 10 N.m (89 lb in)
2	Rear Auxiliary Turn Signal Lamp Assembly Procedure Disconnect the electrical bulb socket for the auxiliary turn signal. Disconnect the electrical bulb socket for the back up lamp socket. Remove the rear auxiliary turn signal lamp assembly from the rear compartment lid.

Callout

Component Name

Preliminary Procedures

Open the rear compartment lid in order to access the rear auxiliary tail lamp assembly nuts.
Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

Rear Auxiliary Turn Signal Lamp Assembly Nut (Qty: 4)

CAUTION:

TIP: Check to ensure the outer tail lamp bracket is secure.
Tighten
10 N.m (89 lb in)

Rear Auxiliary Turn Signal Lamp Assembly

Procedure

Disconnect the electrical bulb socket for the auxiliary turn signal.
Disconnect the electrical bulb socket for the back up lamp socket.
Remove the rear auxiliary turn signal lamp assembly from the rear compartment lid.