LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Repair Instructions >> Hazard Warning Switch Replacement

Hazard Warning Switch Replacement

Fig 1: Locating Hazard Warning Switch
GM1646740Courtesy of GENERAL MOTORS COMPANY
Hazard Warning Switch Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Hazard Warning Switch
  1. Use the J 42214 to remove the hazard warning switch and bezel. Insert the tool into the hole in the air outlet on each side of the switch to release the tabs.
  2. Disconnect the electrical connector.
2 Hazard Warning Switch Bezel
scientia non olet · About LEMON Manuals