LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Enclave CX, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Impact Bar Replacement

Front Bumper Impact Bar Replacement

Fig 1: Identifying Front Bumper Impact Bar & Bolts
GM1847153Courtesy of GENERAL MOTORS CORP.
Front Bumper Impact Bar Replacement

Callout Component Name
Preliminary Procedure 
Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Enclave) , Front Bumper Fascia Replacement (Acadia) , Front Bumper Fascia Replacement (Traverse) .
1 Front Bumper Impact Bar Bracket Bolt (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 Front Bumper Impact Bar

Procedure

  1. Disconnect the electrical connectors/harnesses as needed.
  2. Transfer any parts as needed.
  3. Remove right and left side air baffle attached at the impact bar.
scientia non olet · About LEMON Manuals