Hood Replacement
Hood Replacement
| Callout | Component Name |
|---|---|
|
WARNING:
Preliminary Procedure Disconnect the hood strut rod. Refer to Hood Strut Replacement .When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. |
|
| 1 | Hood Hinge Pivot Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 2 | Hood Strut
|
| 3 | Hood |