LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Enclave CX, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Door Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement .
    2. Fig 1: Pinch-Weld Flange Weatherstrip (Front Door Opening)
    GM686582Courtesy of GENERAL MOTORS CORP.
  2. Remove the weatherstrip (1) from the pinch-weld flange (2).
scientia non olet · About LEMON Manuals