LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Vehicle Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front tire and wheel. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View Of Vehicle Speed Sensor (VSS) Electrical Connector
    GM161100Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the vehicle speed sensor (VSS) electrical connector.
    4. Fig 2: Identifying Vehicle Speed Sensor (VSS)
    GM10516Courtesy of GENERAL MOTORS CORP.
  4. Remove the VSS bolt (9).
  5. Remove the VSS (10) from the extension case.
    6. Fig 3: View Of VSS & O-Ring
    GM10711Courtesy of GENERAL MOTORS CORP.
  6. Remove the O-ring (11) from the VSS (10).
scientia non olet · About LEMON Manuals