Transmission Support Fixture Assemble

Special Tools

• J 3289-20:  Holding Fixture Base
• J 28664-B:  Transmission Holding Fixture
• J 44465:  Holding Fixture Adapter (if required)

For equivalent regional tools, refer to Special Tools .

Fig 1: J 28664-B & J 3289-20 Installed Onto Transmission
Courtesy of GENERAL MOTORS CORP.
1. Install J 44465:  fixture adapter (if required) onto J 28664-B:  holding fixture.
2. Install J 28664-B:  holding fixture onto the transmission.
3. Install the transmission and holding fixture into J 3289-20:  holding fixture base.
4. Insert the pin into J 3289-20:  holding fixture base in order to hold the transmission in the desired position.