Removal Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the left tire and wheel assembly.
Remove left inner splash shield.
Position a transmission jack under the transaxle.

Fig 1: Raising Transaxle Assembly

GM630964

Courtesy of GENERAL MOTORS CORP.

Remove the transaxle mount upper nuts from the transaxle bracket.
Carefully raise the transaxle assembly.

Fig 2: Transaxle Mount

GM462438

Courtesy of GENERAL MOTORS CORP.

Remove the transaxle mount lower nuts from the frame.
Remove the transaxle mount from the frame.