Transmission Holding Fixture Disassemble

Special Tools

• J 28664-B:  Transmission Holding Fixture
• J 3289-20:  Holding Fixture Base
• J 44465:  Holding Fixture Adapter (if required)

For equivalent regional tools, refer to Special Tools .

Fig 1: J 28664-B & J 3289-20 Installed Onto Transmission
Courtesy of GENERAL MOTORS CORP.
1. Remove the pin from J 3289-20:  fixture base.
2. Remove the transmission and J 28664-B:  holding fixture from J 3289-20:  fixture base.
3. Remove J 28664-B:  holding fixture from the transmission.
4. Remove J 44465:  fixture adapter (if required) from J 28664-B:  holding fixture.