LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Control Replacement >> Removal Procedure

Removal Procedure

  1. Remove the console trim plate. Refer to FRONT FLOOR CONSOLE REPLACEMENT .
  2. Remove the console wiring harness.
    3. Fig 1: Removing Console Shift Control Wiring Harness
    GM161196Courtesy of GENERAL MOTORS CORP.
  3. Remove the console shift control wiring harness.
  4. Remove the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement .
  5. Disconnect the lightbulb and the retainer from the shiftier.
    6. Fig 2: Console Shift Control Assembly
    GM161200Courtesy of GENERAL MOTORS CORP.
  6. Remove the console shift control retaining nuts.
  7. Remove the console shift control assembly from the vehicle.
scientia non olet · About LEMON Manuals