LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Torque Converter Assembly Removal

Torque Converter Assembly Removal

    Fig 1: View Of Torque Converter Assembly
    GM47958Courtesy of GENERAL MOTORS CORP.
    WARNING: The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.
  1. Remove the torque converter assembly (1).
    2. Fig 2: Identifying Turbine Shaft O-Ring Seal
    GM10484Courtesy of GENERAL MOTORS CORP.
  2. Remove the turbine shaft O-ring seal (520).
scientia non olet · About LEMON Manuals