LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Thermo Element Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the oil pan. Refer to Oil Pan Replacement .
    3. Fig 1: View Of Thermo Element & Plate
    GM164817Courtesy of GENERAL MOTORS CORP.
  3. Remove the thermo element pins (120, 123) and the washers.
  4. Remove the thermo element (121) and the thermo element plate (122).
scientia non olet · About LEMON Manuals