LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Pressure Control Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the case side cover. Refer to Control Valve Body Cover Replacement .
  2. Disconnect the pressure control solenoid (PCS) electrical connector.
  3. Remove the PCS retaining clip (314E).
  4. Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  5. Remove the PCS (322).