LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Input and 3rd Clutch Functional Air Check

Input and 3rd Clutch Functional Air Check

    Fig 1: Locating Fluid Passages
    GM10654Courtesy of GENERAL MOTORS CORP.
    CAUTION: Do not exceed the recommended amount of air pressure or it may damage or cause seals to roll.
  1. Use a rubber tipped air nozzle in order to apply a maximum 138 kPa (20 psi) at each indicated fluid passage.
  2. Listen for the following:
    • The third clutch (1) assembly to apply
    • The input clutch (2) assembly to apply
scientia non olet · About LEMON Manuals