Input Clutch Housing, Input Clutch Pawl, and 3rd Clutch Pawl Assemble

Fig 1: View Of Sprag Clutch Assembly

Courtesy of GENERAL MOTORS CORP.

Use a small screwdriver in order to align the teeth of the input clutch plate assembly and the third clutch plate assembly. This will ease installation of the clutch pawl assembly.

NOTE: Make sure that the clutch pawl assembly is fully seated into the housing.

Insert the combined input clutch pawl (728), third clutch pawl (727) and input sun gear (668) assembly into the input clutch housing assembly (632).