Special Tools

J 38358-A:  1-2 Support Remover and Installer

For equivalent regional tools, refer to Special Tools .

Fig 1: J 38358-A & 1-2 support Drum Assembly
Courtesy of GENERAL MOTORS CORP.
1. Install J 38358-A:  remover and installer onto the 1-2 support drum assembly (683-687).
2. Lift J 38358-A:  remover and installer with the 1-2 support drum out of the case.
Fig 2: Locating Forward Band Assembly
Courtesy of GENERAL MOTORS CORP.
3. Tilt the forward band assembly (688) in order to disengage the band from the anchor pin in the case. Remove the forward band assembly.