Transmission Fluid Cooler Flushing and Flow Test (J-35944-A): Clean-up
- Disconnect the water supply hose from the J-35944-A: flusher and bleed any remaining air pressure from the flusher tank.
- Remove the fill cap from the J-35944-A: flusher and return any unused flushing solution to its container. Rinse the J-35944-A: flusher with water. Do not store the J-35944-A: flusher with flushing solution in it.
- After every third use, clean the J-35944-A: flusher as described in the instructions included with the tool.
- Dispose of any waste water/solution and transmission fluid in accordance with local regulations.