LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System & Fuel System - 5.3L - DTC P0016 To DTC P0358) >> DTC P0351-P0358 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. With the engine running, monitor the following ignition control (IC) circuit status parameters, with a scan tool:
    • Cylinder 1-8 IC Ckt. Short Gnd Test Status
    • Cylinder 1-8 IC Ckt. Open Test Status
    • Cylinder 1-8 IC Ckt. Short to Volts Test Status
    • Each parameter should display OK.
  2. With the engine running, observe the Misfire Current counters with a scan tool.
    • The counters should not be incrementing.
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.