LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2009 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System & Fuel System - 5.3L - DTC P0016 To DTC P0358) >> DTC P0324, P0325, P0326, P0327, P0328, P0330, P0332, or P0333 >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Connect a DMM to both KS signal circuits, terminals A and B, at the KS.
  2. Set the DMM to the 400 mV AC hertz scale and wait for the DMM display to stabilize at 0 Hz.
  3. IMPORTANT: DO NOT tap on plastic engine components.
  4. Tap on the engine block with a non-metallic object near the KS while observing the signal indicated on the DMM.
  5. The DMM should display a fluctuating frequency while tapping on the engine block.