Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
- If removing the positive crankcase ventilation (PCV) clean air tube perform the following:
- Remove the PCV clean air tube from the air intake duct.
- Remove the PCV clean air tube from the rocker arm cover.
- Remove the PCV clean air tube.
- If removing the PCV foul air tube perform the following:
- Remove the PCV foul air tube from the intake manifold.
- Remove the PCV foul air tube from the rocker arm cover.
- Remove the PCV foul air tube.