LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Accumulator and 2-1 Manual Servo Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
    3. Fig 1: Identifying Accumulator & Manual 2-1 Band Servo Cover Bolts
    GM164809Courtesy of GENERAL MOTORS CORP.
  3. Remove the accumulator bolts (131).
  4. Remove the manual 2-1 band servo cover bolts (103).
    5. Fig 2: View Of Accumulator Assembly
    GM97365Courtesy of GENERAL MOTORS CORP.
  5. Remove the accumulator assembly.
    6. Fig 3: View Of Manual 2-1 Band Servo
    GM164811Courtesy of GENERAL MOTORS CORP.
  6. Remove the manual 2-1 band servo (106-116).
scientia non olet · About LEMON Manuals