Assembly Procedure
Courtesy of GENERAL MOTORS CORP.
- Inspect the differential carrier internal gear assembly (693) for the following conditions:
- Damaged or worn bushings
- Plugged lube oil holes
- Damaged case splines
- Damaged or worn gear teeth
- A damaged or worn park pawl assembly (694)
- A damaged snap ring (692)
Courtesy of GENERAL MOTORS CORP.
- Install the differential carrier internal gear assembly (693) into the case. Align the park pawl assembly with the park pawl actuator assembly.
Courtesy of GENERAL MOTORS CORP.
- Use J 28585
or a long screwdriver in order to install the snap ring (692) into the case as shown. See Special Tools .