LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> Control Valve Body Cover and Gasket Disassemble

Control Valve Body Cover and Gasket Disassemble

    Fig 1: View Of Control Valve Body Cover Bolts
    GM840836Courtesy of GENERAL MOTORS CORP.
  1. Position the transaxle so that the control valve body cover (53) is facing up.
  2. Remove the 17 control valve body cover bolts:
    • 9 flanged bolts (56)
    • 4 TORX bolts (57)
    • 4 stud bolts (58)
  3. Remove the cover (53), outer gasket (54) and inner gasket (59).
scientia non olet · About LEMON Manuals