LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> 1-2 Support Roller Clutch Disassemble

1-2 Support Roller Clutch Disassemble

    Fig 1: Identifying Thrust Bearing & 1-2 Support Drum
    GM10612Courtesy of GENERAL MOTORS CORP.
  1. Use a small screwdriver in order to gently pry the thrust bearing (685) off of the 1-2 support drum (687).
  2. Lift the 1-2 clutch roller assembly (683) out of the 1-2 support drum.
scientia non olet · About LEMON Manuals