LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - Off Vehicle >> 1-2 Support Drum and Forward Band Removal >> Removal Procedure

Removal Procedure

    Fig 1: View Of J 38358-A & 1-2 Support Drum Assembly
    GM1818442Courtesy of GENERAL MOTORS CORP.
  1. Install J 38358-A  onto the 1-2 support drum assembly (683-687). See Special Tools .
  2. Lift J 38358-A  with the 1-2 support drum out of the case. See Special Tools .
    3. Fig 2: Locating Forward Band Assembly
    GM893327Courtesy of GENERAL MOTORS CORP.
  3. Tilt the forward band assembly (688) in order to disengage the band from the anchor pin in the case. Remove the forward band assembly.
scientia non olet · About LEMON Manuals