LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Repair Instructions >> Heater Inlet Hose Replacement (LY7)

Heater Inlet Hose Replacement (LY7)

Fig 1: View Of Heater Hoses
GM1602255Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Drain the cooling system. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill) or Cooling System Draining and Filling (L26 Static Fill) or Cooling System Draining and Filling (LY7 Static Fill) or Cooling System Draining and Filling (LS4 GE47716 Fill) or Cooling System Draining and Filling (LS4 Static Fill) .
1 Heater Inlet Hose
Tip:  Use J 38185  Hose Clamp Plier to release the clamp on the radiator inlet hose.
2 Heater Outlet Hose
Tip:  Use J 38185  Hose Clamp Plier to release the clamp on the heater hose.
scientia non olet · About LEMON Manuals