LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System & Fuel System - 3.6L - DTC P0335 To DTC P2097) >> DTC P0443, P0458, or P0459 >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Ignition OFF, disconnect the harness connector at the EVAP purge solenoid.
  2. Test for 15-20 ohms of resistance between the terminals of the EVAP purge solenoid.
    • If not within the specified range, replace the EVAP purge solenoid.
  3. Test for infinite resistance between each terminal of the EVAP purge solenoid and the EVAP purge solenoid housing.
    • If less than the specified range, replace the EVAP purge solenoid.