Conditions for Running the DTCs

WARNING: This page is about a different variant/trim than selected.

Before the ECM can report DTC P0328, or P0333 failed, DTCs P0324, P0335, P0336, and P0338 must run and pass.
DTCs P0341, P0342, P0343, P0346, P0347, P0348, P0366, P0367, P0368, P0391, P0392, and P0393 are not set.
The ECM is controlling spark.
The engine coolant temperature (ECT) sensor is greater than 60°C (140°F).
The engine speed is greater than 2,000 RPM and steady.
The volumetric efficiency is steady.
DTCs P0327 and P0332 run continuously once the above conditions are met for approximately 20 seconds.