Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

Before the ECM can report DTC P0053 failed, DTCs P0030, P0031, P0032, P0101, P0121, P0122, P0123, P0130, P0131, P0132, P0133, P0221, P0222, P0223, P0335, P0336, P0338, P167A, P2243, and P2251 must run and pass.
The engine is operating.
The ignition voltage is between 11-18 volts.
DTC P0053 runs continuously once the above conditions are met for 40 seconds.