Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
- The ECM detects one of the following conditions:
- The ECM detects a deviation in the relationship between a camshaft and the crankshaft.
- A camshaft is greater than 14 degrees advanced in relationship to the crankshaft.
- A camshaft is greater 14 degrees retarded in relationship to the crankshaft.
- The ECM detects the difference between an actual intake camshaft angle and the locked position angle is greater than 20 degrees.
- The ECM detects the difference between an actual exhaust camshaft angle and the locked position angle is greater than 25 degrees.
- The condition exists for greater than 4 seconds or a cumulative of 50 seconds.