Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Engine idling at normal operating temperature, raise the engine speed to 2,000 RPM for 10 seconds. DTCs P0010, P0013, P0020, P0023, P2088, P2089, P2090, P2091, P2092, P2093, P2094, or P2095 should not set.
- Operate the vehicle within the conditions for running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.