Diagnostic Fault Information
WARNING: This page is about a different variant/trim than selected.
Fuel Injector Balance Test Example
| Cylinder | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
| First Reading | 360 kPa (52 psi) | 360 kPa (52 psi) | 360 kPa (52 psi) | 360 kPa (52 psi) | 360 kPa (52 psi) | 360 kPa (52 psi) |
| Second Reading | 195 kPa (28 psi) | 138 kPa (20 psi) | 195 kPa (28 psi) | 195 kPa (28 psi) | 235 kPa (34 psi) | 195 kPa (28 psi) |
| Amount Of Drop | 166 kPa (24 psi) | 222 kPa (32 psi) | 166 kPa (24 psi) | 166 kPa (24 psi) | 125 kPa (18 psi) | 166 kPa (24 psi) |
| Average Range: 156-176 kPa (22.5-25.5 psi) | Injector OK | Fuel Injector - Too Much Pressure Drop | Injector OK | Injector OK | Faulty Injector - Too Little Pressure Drop | Injector OK |