LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - On Vehicle >> Upper Intake Manifold Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Sight Shield
    GM1551851Courtesy of GENERAL MOTORS CORP.
  1. Pull up on the front and rear of the sight shield in order to disengage sight shield from the studs.
  2. Remove the engine sight shield from the vehicle.