LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator & Tube
    GM1411879Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator (418) from the tube.
  2. Remove the oil level indicator tube bolt (419).
  3. Remove the oil level indicator tube (420).
    4. IMPORTANT: Inspect the O-ring for cuts or damage. The O-ring may be used again if it is not cut or damaged.
  4. Remove the O-ring (421) from the tube, as required.
scientia non olet · About LEMON Manuals