LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - Off Vehicle >> Engine Coolant Air Bleed Pipe and Hole Cover Removal

Engine Coolant Air Bleed Pipe and Hole Cover Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Coolant Air Bleed Pipe & Bolts
    GM1411913Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine coolant air bleed pipe bolts (309).
  2. Remove the pipe (307) with hose and seals (308).
    3. Fig 2: View Of Coolant Air Bleed Pipe & Clamp
    GM1458438Courtesy of GENERAL MOTORS CORP.
  3. Remove the hose (311) and clamps (322) from the pipe (307), as required.
    4. Fig 3: View Of Engine Coolant Air Bleed Cover, Bolts & Gaskets
    GM1411915Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine coolant air bleed cover bolts (312).
  5. Remove the covers (313) with seals (308).
    6. Fig 4: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS CORP.
  6. Remove the seals (308) from the pipe and covers.
  7. Discard the seals.
scientia non olet · About LEMON Manuals