LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Passages & Crankshaft Position (CKP) Sensor Reluctor Ring Teeth
    GM1402145Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Use care when handling the crankshaft. Avoid damage to the crankshaft position (CKP) sensor reluctor ring teeth. Nicks, burrs, or other damage to the teeth may affect on-board diagnostics (OBD) II system performance.
  1. Clean the crankshaft with solvent.
  2. Thoroughly clean all oil passages (2) and inspect for restrictions or burrs.
    3. CAUTION: Refer to Safety Glasses Caution .
  3. Dry the crankshaft with compressed air.
scientia non olet · About LEMON Manuals