LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Valve Lifter Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the applicable camshaft(s). Refer to Camshaft Replacement - Left Side .
  2. Remove the rocker arms. Refer to Valve Rocker Arm Removal - Left Side .
    3. Fig 1: Identifying Stationary Hydraulic Lash Adjuster (SHLA)
    GM946248Courtesy of GENERAL MOTORS CORP.
  3. Remove the lifters. Refer to Valve Lifter Removal - Left Side .
  4. Clean and inspect the camshaft(s), rocker arm(s) and lifter(s). Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection and Valve Lifters Cleaning and Inspection .
scientia non olet · About LEMON Manuals