LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.6L (2 Of 5)) >> On-Vehicle Repair Information (1 Of 2) >> Primary Camshaft Drive Chain Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Primary Camshaft Drive Chain Tensioners
    GM902847Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
    2. IMPORTANT: If the entire camshaft timing system is not in Stage 2, Camshaft Timing Drive Chain Alignment Diagram (Third Design) or Camshaft Timing Drive Chain Alignment Diagram (Fourth Design) , mark the timing chain and sprockets in order to ensure proper reassembly.
  2. Remove the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Removal (Fourth Design) .
scientia non olet · About LEMON Manuals