Conditions for Setting the DTC: P2138
WARNING: This page is about a different variant/trim than selected.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is greater than 0.25 volts.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is greater than 0.29 volts with a partially pressed pedal.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is greater than 1.1 volts with a fully pressed pedal.
- The ECM detects that the APP 1 voltage is greater than 1.23 volts when leaving the idle range, and the voltage difference between APP sensor 1 and 2 is greater than 0.04 volts.
- Any of the above conditions exist for greater than 4 seconds.