Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Remove the fuel sender from the fuel tank. Refer to Fuel Tank Module Replacement .

Fig 1: View Of Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the fuel level sensor electrical connector located in the module cover.
Use a small flat-bladed tool in order to disengage the fuel level sensor retainer.

Fig 2: Aligning Fuel Level Sensor

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor down in order to remove the fuel level sensor from the fuel sender module.