Radiator Inlet Hose Replacement (LY7)

Fig 1: View Of Radiator Inlet Hose

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications . Preliminary Procedure:  Drain the cooling system. Refer to Cooling System Draining and Filling (L26, LY7 GE 47716 Fill)  or Cooling System Draining and Filling (L26 Static Fill)  or Cooling System Draining and Filling (LY7 Static Fill)  or Cooling System Draining and Filling (LS4 GE47716 Fill)  or Cooling System Draining and Filling (LS4 Static Fill) .
1	Hose, Coolant Recovery Tip:  Use J 38185  Hose Clamp Pliers, to release the clamp on the radiator inlet hose. See Special Tools .
2	Cap, Radiator
3	Hose, Radiator Inlet Tip:  Use J 38185  Hose Clamp Pliers, to release the clamp on the radiator inlet hose. See Special Tools .