Sunshade Replacement

Fig 1: Identifying Sunshade & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Lower the front of the headliner to access the sunshade electrical connector, if necessary. Refer to Headlining Trim Panel Replacement .
1	Sunshade Trim Cover
2	Sunshade Screws (Qty: 3) Tighten: 3 N.m (27 lb in)
3	Sunshade Assembly Tip: Disconnect the electrical connector. Remove the sunshade anchor from the roof by unsnapping, if needed.