LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Door Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Door Opening Weatherstrip
    GM164727Courtesy of GENERAL MOTORS CORP.
  1. Open the rear door.
  2. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement .
  3. Remove the rear quarter lower trim. Refer to Rear Quarter Lower Trim Panel Replacement .
  4. Remove the weatherstrip.

    Starting in the center bottom of the weatherstrip, pull the weatherstrip upward and away from the pinch-weld flange.

  5. Remove the weatherstrip from the door opening.
scientia non olet · About LEMON Manuals