LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Strut Replacement >> Removal Procedure

Removal Procedure

  1. Open and support the rear compartment lid.
    2. NOTE: Refer to LIFTGATE ASSIST ROD NOTICE .
  2. Use a small flat-bladed tool in order to lift up the locking clip on the strut upper ball stud.
  3. Press out the upper ball stud.
  4. Use a small flat-bladed tool in order to lift up the locking clip on the strut lower ball stud.
  5. Press out the lower ball stud.
    6. Fig 1: Identifying Rear Compartment Hinge
    GM324455Courtesy of GENERAL MOTORS CORP.
  6. Remove the rear compartment lid strut from the hinge.
scientia non olet · About LEMON Manuals