LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Strut Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Rear Compartment Hinge
    GM324455Courtesy of GENERAL MOTORS CORP.
  1. Position the rear compartment lid strut to the hinge.
  2. Press in the lower ball stud.
  3. Press in the upper ball stud.
  4. Close both locking clips.
  5. Remove the rear compartment lid support.
  6. Close the rear compartment.
scientia non olet · About LEMON Manuals