LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Plenum To Hood Weather Strip
    GM317839Courtesy of GENERAL MOTORS CORP.
  1. Align the weatherstrip to the flange.
  2. Starting at the passenger side corner, press the weatherstrip onto the flange. Work toward the center of the car.
  3. Close the hood.
scientia non olet · About LEMON Manuals