LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Open Assist Rod Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Upper End Assist Rods
    GM625128Courtesy of GENERAL MOTORS CORP.
  1. Install the upper end of the assist rods on to the ball joint on the hood.
    2. Fig 2: View Of Lower End Assist Rods
    GM625126Courtesy of GENERAL MOTORS CORP.
  2. Install the lower end of the assist rods on to the ball joint on the lower hood hinge
  3. Remove the support from the hood.
  4. Close the hood.
scientia non olet · About LEMON Manuals